TP-Link MC112CS 10/100M RJ45 to 100M...

TP-Link MC112CS 10/100M RJ45 to 100M single-mode SC fiber Converter, Full-duplex,Tx:1310nm, Rx:1550nm, up to 20Km, switching pow

Fuera de stock
30,90 €
Impuestos incluidos
The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINK’s media converter MC111CS is just one of the examples to cooperate with MC112CS. Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.   Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Adopts WDM technology, transmitting and receiving data on one single fiber Extend fiber distance up to 20-60km Easy-to-view LED indicators provide status to monitor network activity easily External power supply Standards and Protocols  IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function  Adopts WDM technology  Half/Full-Duplex transfer mode for FX port  Full Duplex Flow Control (IEEE 802.3x)  Half Duplex Flow Control (Backpressure)  Extends fiber distance up to 20km  Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Ports  1 100M SC port  1 100M RJ45 port (Auto MDI/MDIX) WDM TX  1310nm RX  1550nm Network Media 10BASE-T  UTP category 3, 4, 5 cable (maximum 100m)  EIA/TIA-568 100? STP (maximum 100m) 100BASE-T  UTP category 5, 5e cable (maximum 100m)  EIA/TIA-568 100? STP (maximum 100m) 100BASE-FX  Single-mod Fiber LED Indicators  PWR, FDX/Col, Link/Act, SPD Safety & Emission  FCC, CE Dimensions (W*D*H)  3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) Environment  Operating Temperature: 0?~40? (32?~104?)   Storage Temperature: -40?~70? (-40?~158?)   Operating Humidity: 10%~90% non-condensing   Storage Humidity: 5%~90% non-condensing Power Supply  External Power Adapter   More information of the 100M series Media Converter Type Connector Transmission Distance Transmission Media Output Center Wavelength MC100CM RJ45--SC 2km Multi-mode Fiber,Cat-5 1310nm MC110CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1310nm MC110CS-40 RJ45--SC 40km Single-mode Fiber,Cat-5 1310nm MC110CS-60 RJ45--SC 60km Single-mode Fiber,Cat-5 1310nm MC111CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1550nmTX/1310nmRX MC111CS-40 RJ45--SC 40km Single-mode Fiber,Cat-5 1550nmTX/1310nmRX MC111CS-60 RJ45--SC 60km Single-mode Fiber,Cat-5 1550nmTX/1310nmRX MC112CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1310nmTX/1550nmRX MC112CS-40 RJ45--SC 40km Single-mode Fiber,Cat-5 1310nmTX/1550nmRX MC112CS-60 RJ45--SC 60km Single-mode Fiber,Cat-5 1310nmTX/1550nmRX
250 Gr.
Articulo nuevo, sin usar, sin abrir, sin desperfectos y en el paquete original (en caso de venir empaquetado).
No reviews

2 otros productos en la misma categoría:

Producto agregado a la lista de deseos
Product added to compare.

Las cookies de este sitio se usan para personalizar el contenido y los anuncios para ofrecer funciones de medios sociales y para analizar el tráfico. Además, compartimos información sobre el uso que haga del sitio web con nuestros partners de medios sociales de publicidad y de análisis web. Más información